Bs 476 Part 22 PDF
BS 476: Part 6: 1989 Method Of Test For Fire Propagation For Products WF Report Number: 170761 Date: 14th March 2008 Test Sponsor: Alucoil S.A.
WARRES No. 106497 Page 2 of 27 Fire Resistance Test Generally In Accordance With BS 476: Part 22: 1987, Clause 5, on an Uninsulated Fabric Barrier
Fire Resistance Test in Accordance with BS 476: Part 22: 1987, Clause 7, on a Single Specimen of a Partially Insulated, Single-Acting, Joist Mounted T.D.I Lofthatch
Steel Fire Doors to British Standard Single and double-leaf doors in matching appearance with additional protection features // Tested to BS 476, LPS, Part 22: 1987, Approved to 1056
Test Name Test House Test Parameter BS 476: Part 22 Warrington Fire Vertical Fire Curtain, Single up to 6m width and Overlapping with unlimited overlap and 7m drop.
The time - temperature curve in a BS 476: Part 22 test mimics a standardised 'flash-over' in a real fire. Revolutionary New Intumescent Glazing Systems
Title: The fire resistance performance of a specimen of a symmetrical, non-loadbearing, wall assembly tested in accordance with BS 476: Part 22: 1987,
2 Fire Resistance Period: BSN-1/60 = 60 minutes,BSN-1/120 = 120 minutes Fire Resistance Test in Accordance with: BS 476 / Part 22 / 8 (British Standard)
BS 476: Part 20/22: 1987 (and current FTSG Resolutions where applicable). Test Chilt/IF13037 This letter is to confirm the results of an indicative fire resistance test undertaken on 4th April 2013. Details of the test specimen
Testing proceduress follow the British Standard BS 476 : Fire tests on building materials and structures (BS 476 Part 20 : 1987 and BS 476 Part 22 : 1987)
• Walls/Partitions BS 476: Part 21 & 22 / BS EN 1364-1 & 1365-1 • Floors and roofs BS 476: Part 21 / BS EN 1365-2 • Beams and columns BS 476: Part 23 • Ceilings BS 476: Part 22 / BS EN 1364-2 2.2 The Method (BS 476: Part 22 & BS EN 1634-1) The tests are ...
under the prescribed conditions of British Standard 476: Part 22: 1987. Intumescent strip should be continuou s to top and both sides of door or frame, and not interrupted by hinge or latch fittings. Strip or paste can be used behind the fittings, or
In multi-occupancy dwellings, the entrance door to each flat may be required to have a fire resistance to BS 476 Part 22 as defined in BS 5588, or Part B of the Approved
120 minutes fi re resistance, integrity only, in accordance with the criteria of BS 476: Part 22 and AS 1530: Part 4. Supporting Structure Care should be taken that any structural element to which the spandrel wall system is affi xed, e.g. a beam, fl oor or wall, has a minimum
BS 476 Part 22 1987 Clause 8 Warres 104732 September 1998 Summary:A fire resistance test,in accordance with Clause 8 of BS 476 Part 22 has been performed on a single specimen of an asymmetrical,uninsulated drop curtain.The specimen satisfied the
Accordance with BS 476: Part 22: Clause 5 Note: This report is additional to that issued as WFRC No. 142323 and dated 22nd December 2004. The original report remains valid and is not replaced by this additional test report. Title: Microsoft Word ...
Complies with BS 476 part 22 / SS 489: 2001, UL 10B Approved by UAE Civil Defense and Singapore Civil Defense with products listed under Cert Fire Product Listing Scheme The specifications shall cover the design, manufacture, installation and operation to the required fire rating as
conditions as specified in IS:3809 - 1979 and BS:476 part 20 & 22 1987 to achieve the required integrity & insulation (I.e. to restrict the heat radiation, temperature rise on the non fire side to the maximum of 140
BS 476 part 22: 1987 for 30 minutes. Add to this our CHAS and Construction line accreditations as well as industry recognised FENSA and PWF professional standard certificates and it gives you the complete peace of mind you need. The Sekura Group
BS 476: Part 22: 1987 62 ULSASD – Unlatched, Single Acting, Single Doorset ULSADD – Unlatched, Single Acting, Double Doorset * The failed single leaf, single acting doorset designs have been assessed through a change in intumescent specification.
Testing for Fire Curtains Summary Test Name Test House Test Parameter BS 476: Part 22 Warrington Fire Vertical Fire Curtain Vertical Fire Curtain with Overlap
WF Test Report No. 322589 Page 2 of 27 Summary Objective To determine the fire resistance performance of a non-loadbearing wall assembly when tested in accordance with BS 476: Part 22: 1987.
BS 476: Part 7: 1997 Method For Classification Of The Surface Spread Of Flame Of Products A Report To: Parex USA Incorporated Document Reference: 189829 ... 22, 2:49, 1:30 and 3:00 respectively. Document No.: 189829 Page No.: 10 of 11
BS 476: Part 22: 1987 Note: The doorsets to which the Pilkington PYRODUR glass is fitted must have incorporated glazing and been successfully tested or assessed (by WFRC) to BS 476: Part 22: 1987. The door leaves may be latched or unlatched, single or double-leaf, single
BS 476: Part 6: 1989 Method Of Test For Fire Propagation For Products WF Report Number: 158896 Date: 8th November 2006 Test Sponsor: Union Foam S.p.A
REFERENCES BRITISH STANDARDS AND CODES OF PRACTICE BS 476Fire tests on building materials and structures BS 476:Part 3:1958 External fire exposure roof test
WFRC TEST REPORT NO. 139085 single-acting, single-leaf doorset, The fire resistance performance of a specimen of a fully insulated, in accordance with BS 476: Part 22:
BS 7346: Part 3: 1990 BS 476: Part 6: ... Product Performance: Complete product tested to BS476: Part 20/22, and achieved a rating of DA (1000°C ...
Tested to BS 476 PART 22 for 30 or 60 minutes fire rating Tested to BS EN 20140-10 Tested to BS EN ISO140 - Rw 29dB acoustic rating Adjustable door thickness from 42-47mm, 47-52mm ... BS 476 Part22 by Chiltern Fire Acoustic Testing Tested to BS EN ISO 140
integrity criterion of BS 476 Part 22 1987 when exposed to fire from either direction Conclusions:Therefore it is our opinion that the uninsulated fire curtain assembly, as described in section 4 of this report,is suitable where a fire resistance of up to
has been subjected to a fire resistance test in accordance with BS 476: Part 22: 1987, Clause 5. Evaluation against objective The specimen satisfied the performance requirements specified in the Standard for the periods stated below: Test Results:
Page 1 of 6 BS 476: Part 7: 1997 on K-FINISH RAL 7035 applied to a steel substrate. Prepared for: L’Isolante K-Flex Srl Via Leonardo da Vinci, 36
must conform to BS 476 part 22 1987 (BS 476 part 22 1987 - Fire tests on building materials and structures). Fire doors alllow access to protected escape routes, both vertically and horizontally, without any loss of fire resistance.
BS 476: Part 22: 1987 33 (failure of latch – perimeter failure at 38) RF11026 (large ply face with no perimeter stiles and rails) LSASD 2761 1236 44 BS 476: Part 22: 1987 39 . The legal validity of this report can only be claimed on presentation of the complete report.
Scope of test BS 476: Part 6: 1989+A1: 2009 specifies a method of test, the result being expressed as a fire propagation index, ... 1.00 26 22 0.40 1.50 31 28 0.20 2.00 36 33 0.15 2.50 40 35 0.20 3.00 44 39 0.17 2.12 4.00 74 71 0.08 5.00 115 108 0 ...
BS 476: Part 22, 1987 Fire Test for Building Materials in non loadbearing elements of construction. FIXING DETAILS Metal and Concrete Soffit fixing When fixing to a concrete soffit, the continuous clamping angle, size 40x60x1,5mm or 50x50x1.5mm, should be
and doorset B was tested in accordance with BS 476: Part 22: 1987, Method 6 , Determination of fire resistance of fully insulated doorsets and shutter assemblies. The requirements of the standard were satisfied for the following periods:
BS 476: Part 22, 1987 Fire Test for Building Materials in non loadbearing elements of construction passive fire protection and insulation FIREUS www.fireus.co.uk 01524 388898 SAFIRE a brand of Fireus Ltd. Fireus Ltd. Unit 6 Thetis Road, Lune Industrial Estate, Lancaster, LA1 5QP
- BS 476 Part 22. Model name. Sina Z3 (Dead Lock) Heavy quality Italy made Europe profile. Product description. Function - Dead lock for cylinder. Drawing. Zina Z3 (Dead Lock) Mortise Lockcase (Europe Profile) 5. Specification - In conformity to EN 12209:2003. Standard.
BS 476: Part 3: 2004 External Fire Exposure Roof Test WF Report Number 186171 (Issue 2) Date: 26th September 2009 Test Sponsor: Kalzip Limited
BS 476: Part 22: 1987 WF Assessment Report No: 312799 Prepared for: Artema Puertas S.A. Ctra. Villacanas-Quintanar s/n, 45850 Villa de Don Fadrique Toledo Spain Date: 28th October 2011 . WF Assessment Report No. 312799 Page 2 of 10 TABLE OF CONTENTS
The specimens for testing to BS 476: Part 6: 1989+A1: 2009 together with the specimens for testing to BS 476: Part 7: 1997 were received on the 5th December ... 265 230 0.22 20.00 294 237 0.32 280 242 0.19 1.43 Total Index of Performance S = 11.77 SubIndex s1 5.38 SubIndex s2 4.97 SubIndex s3
BS 476: Part 22, for a non-loadbearing assembly, for the following periods: Integrity : 24 minutes Insulation : 4 minutes Assessed Performance General Performance The specimen tested under the reference WF Test Report No. 185409
•BS 476 Part 22 stipulated in Clause E3.2; or •Make reference to the Tables in Part E. Fire Tests for Non-loadbearing Elements ... •BS 476 Parts 20 and 22 stipulated in Clause E5.2. Fire Tests for Protection of Openings in Fire Barriers (Doors, Windows, Shutters)
BS 476: Part 3: 2004 External Fire Exposure Roof Test WF Report Number: 158117 Date: 13th October 2006 Test Sponsor: Tapco Europe Limited 0249
BS 476 Part 22:1987, Sections 6, 7 and 8 BS EN 1634-1:2008 ISO 3008:2007 UL 10B:2009 UL 10C:2009 . 4319 Cambridge Fire Research Limited Accredited to ISO/IEC 17025:2005 Schedule of Accreditation issued by United Kingdom Accreditation Service
conditions given in BS 476: Part 22: 1987, the full requirements of the Standard were not, however, complied with. The information is provided for the test sponsor’s information only and should not be used to demonstrate performance
• Tested to BS 476 part 22 and 31.1 (smoke penetration). Quality combina-tion draught and intumescent letterbox assembly. Adjustable for door thickness 40mm - 80mm. Complete with installation instructions. FD501 748 250x70mm Chrome D/Pack Pack Each
standards BS 476 part 22 and BS 476 part 23: section 6,1987 and all smoke seals have been tested to BS 476 part 31.1(smoke penetration). All Kidde intumescent fire seals are Certifire approved (certificate Ref: CF371 applies)
BS 476: Part 22: 1987 Note: BS 476: Part 22: 1987 only provides for testing glazing in an essentially vertical plane. The test was therefore conducted by analogy to the procedure detailed in BS 476: Part 22: 1987, applying similar conditions