Awwa Standards C207 PDF
The AWWA Standards Committee on Steel Pipe (287), ... edition published in 1978 as AWWA C207-78, Standard For Steel Pipe Flanges For ... copies from the American Water Works Association, 6666 West Quincy Avenue, Denver, CO 80235.
AMERICAN WATER WORKS ASSOCIATION 6666 West Quincy Avenue, Denver, Colorado 80235 www.awwa.org R American Water Works Association ANSI/AWWA C207-01 (Revision of ANSI/AWWA C207-94) ... AWWA standards describe minimum requirements and do not contain all of the engineering and
AWWA standards AWWAstore Catalog / www.awwa.org / 1.800.926.7337 5 designation name no. member List SOURCE Groundwater and Wells A100-06 Water Wells 41100 $54 $85
ANSI/AWWA C207-13 (Revision of AWWA C207-07) AWWA Standard Effective date: June 1, ... American Water Works Association and the Association of State Drinking Water Administrators ... 4. Other references, including AWWA standards, , Food Chemicals Codex
An affidavit of compliance with AWWA standards referenced in this specification. 1.04 Handling, ... Flanges shall be in accordance with AWWA C207 Class D for pressures to 175 psi on 4 inch through 12 inch diameter, and 150 psi on diameters over 12
The AWWA standards usually contain options that must be evaluated by the user of the standard. Until each optional feature is specified by the user. the ... American Water Works Association . AWWA Standard . Disinfecting Water Mains . SECTION 1: GENERAL .
The purpose of this EB is to announce the availability of AWWA Standards on the Department’s IntraDot. DESIGN INFORMATION ... C207 AWWA Standard forSteel Pipe Flanges Waterworks Service-Sizes 4in Through 144in (100mm Through 3600mm)
WATER AGENCIES’ STANDARDS STANDARD SPECIFICATIONS SECTION 15056 DUCTILE-IRON PIPE AND FITTINGS PART 1 GENERAL 1.01 DESCRIPTION ... the approved plans, ductile-iron flanges shall be compatible with AWWA C207, Class “F”.
README – AWWA Pipes, Fittings, and Valves Content Pack Updated This content pack originally contains the following compatible AWWA Industrial standards:
AWWA standards. This guideline specification may be adopted in full or modified by ... or AWWA C207 Class 150 Series B, D, or E. The back-up ring shall provide a long-term pressure rating equal to or greater than the pressure-class of the
of said standards unless otherwise called for. AWWA C200 - Steel Water Pipe – 6 In. (150mm) and Larger ... AWWA C207 - Steel Pipe Flanges For Waterworks Service – Sizes 4 In. Through 144 In. (100mm Through 3,600mm) AWWA C208 - Dimensions for Fabricated Steel Water Pipe Fittings
VSI Resilient Seated Butterfly Valve 24”-72” Standards: • AWWA C504 Sizes*: • 24in (DN600) - 72in (DN1800) Pressure Ratings: • 25 psi to 250 psi*
ANSI/AWWA Standards FULL FACE FLANGE-TYTE ... class 125, and ANSI/AWWA C207 class B, D, and E flanges. NOTE: U.S. Pipe recommends the use of FULL FACE FLANGE-TYTE ...
ansi/aWWa standards. NSF ... class 125, and ANSI/AWWA C207 class B, D, and E flanges. NOTE: U.S. Pipe recommends the use of FULL FACE FLANGE-TYTE ...
said standards unless otherwise called for. AWWA C604 - Installation of Steel Water Pipe – 4 inch and larger . AWWA C200 - Steel Water Pipe – 150mm (6”) and Larger . ... AWWA C207, Class D flanges (matching ANSI/ASME B16.1, Class 125
Dismantling Joint 4” to 40” AWWA (Class D) 38 Viking Johnson Dismantling Joint ... Materials & Relevant Standards Flange Drilling AWWA C207 Drilling Fabricated Flange Adaptor Body - Rolled Steel to BS EN 10025-2:2004 Grade S275
Standards: • AWWA C504 Sizes: • 3in (DN75) - 24in (DN600) Pressure Ratings: • 25 psi to 250 psi* ... • ANSI/ASME B16.5 Class 150 • AWWA C207 *Other options available upon request • The VSI Series AWWA C504 Butterfly Valve is designed for today’s modern water and treatment plants.
American Water Works Association AWWA C150 Thickness design of ductile - iron pipe ... AWWA C207 Steel pipe flanges for waterworks service ... American National Standards Institute ANSI A21.50 same as AWWA C151 ANSI A21.10 same as AWWA C110
of said standards unless otherwise called for: ... AWWA C207 Steel Pipe Flanges for Waterworks Service – Sizes 4” through 144” AWWA C217 Cold-Applied Petroleum Wax Tape Coatings AWWA C600 Installation of Ductile Iron Water Mains
3/4-inch through 2-inch brass fittings shall, have a lead content meeting standards noted above for the fitting in question. ... AWWA C207 Class D, ANSI 150 lb. drilling recessed for tapping valve. Bolts shall be high strength 18-8
overlapping dimensions of some standards. Simply turn to the pressure class required and find the dimensional standard of your choice. 18 Robert-James Sales, Inc. ... AWWA C207 CLASSES B, D 25 Nominal Size Outside Dia. O Slip-On 125 LW, B, D B Ring D X Y2
Specify the class of flange (per AWWA C207 standards) on the drawings. b) Provide a total of four (4) lifting handles on the blind flange, placed ninety (90 ) degrees apart, see Standard Detail W/10.3.
README – AWWA Pipes, Fittings, and Valves Content Pack (Part 1) This content pack contains the following compatible AWWA Industrial standards:
B. Submit affidavit of compliance with referenced standards (e.g., AWWA, ANSI, ASTM, etc.). ... B. Bolts and nuts for AWWA C207 Class F flanges and ANSI B16.5 and B16.47 Class 300 flanges located indoors; outdoors above ground; in vaults and structures; or where buried .
Type AWWA C207 Class D, (ANSI 150# hole pat-tern). Recessed for tapping valve per MSS-SP 60. Finish: ... Meets AWWA C223 Standards. Virtually 360º support of the pipe. Roll-resistant gasket will not bind. Gasket seal increases with line pressure.
AWWA C207 (2007) Standard for Steel Pipe Flanges for Waterworks Service-Sizes 100 mm through 3600 ... conform to the reference standards specified in AWWA C508. Valves shall have clear port opening. Valves shall be spring-loaded where indicated.
Three ANSI1/AWWA 2 standards currently cover flanged joints for Ductile Iron pipe and Ductile Iron and gray iron fittings that are ... 4.AWWA C207: “Steel Pipe Flanges for Waterworks Service,” Class B, Class D and Class E only. The maximum allowable
dices of appropriate ANSI/AWWA standards. Flanged pipe is rated for a maximum working pressure of at least 250 psi as specified in the tables in this Section. The ... They also match certain flange drilling classes of AWWA C207 and ANSI B16.1 and B16.42 flanges.
Large Diameter Flange Standards ... MSS SP44, API 605, and AWWA C207. Specifications also frequently reference Industry Standard flange designs that ... AWWA stands for American Water Works Association.
of said standards unless otherwise called for: AWWA C200 Steel Water Pipe 6-inches and larger AWWA C205 Cement-mortar protective lining and coating ... shall be in accordance with AWWA C207 Class F. Linings or coatings shall be continuous
revisions of the following American Water Works Standards: 1. AWWA C111 American National Standard for Rubber-Gasket Joints for Ductile-Iron Pressure Pipe and Fittings ... The blind flange for the inspection manhole pipe shall be in conformance with AWWA Standard C207. G. Submittals 1.
ANSI/AWWA C207 Steel Pipe Flanges for Waterworks Service 4 in to 144 in ... ASTM pipe manufacturing standards referenced in AWWA C200 shall not be used. Pipe sections shall be fabricated by either of the following methods: 1.
Standards: Complies with AWWA C207, AWWA C228 and AWWAC223. Material SBR per ASTM D 2000 MBA 710, compounded for water and sewer service. Other compounds available on request. Pressure When properly installed these gaskets are rated at
AWWA C207 Steel Pipe Flanges 5. AWWA C208 Dimensions for Fabricated Steel Water Pipe Fittings 6. ... by hand-applications in accordance with applicable AWWA C602 Standards. VISTA IRRIGATION DISTRICT STEEL PIPE, MORTAR LINED AND MORTAR COATED REV. 3/99 02400-15
1.02 REFERENCE STANDARDS . The publications listed below form part of this specification to the extent referenced and are referred to in the text by the basic designation only. ... flanges shall be compatible with AWWA C207, Class “F”.
the following standards: Pipe Cylinder AWWA C200 – Manufacture AWWA M11 – Design Welding AWWA C206 Flanges AWWA C207 Fittings AWWA C208 Hanson welded steel pipe is available in sizes from 32" O.D. up to 124" O.D, and joint lengths up to 50'. Additional Services Installation
Steel flanges shall be AWWA C207, Class D, ring type or blind type as required, ... Section of the American Water Works Association, ... lines, services, and appurtenances shall be identified per AWWA standards. 5. For separation requirements between water and recycled water, ...
Applicable Standards Three ANSI1/AWWA2 standards currently cover flanged joints for Ductile Iron pipe and Ductile Iron and gray iron fittings that are ... 4.AWWA C207: “Steel Pipe Flanges for Waterworks Service,” Class B, Class D and Class E only.
external loads utilizing approved AWWA standards. Steel pipe's strength and versatility enables customized pressure class ... Flanges shall be steel slip-on per AWWA C207. Pipe shall be stulled, shipped, stored, and handled to minimize lining and coating damage, and assure roundness.
- ANSI/AWWA C207-86 “Steel Pipe Flanges for Waterworks Service-Sizes 4 In. Through 144 In.” The primary objective of these standards, ASME and AWWA, is to describe flanges and flange materials in a manner that allows for compatibility with other
MSS, API, AWWA, ANSI AND CSA STANDARDS ANSI, MSS and API standards govern flange dimensions and tolerances. ASME/ANSI B16.5, titled “Steel Pipe Flanges and Flanged Fittings”, is the basic standard. ... AWWA C207-55 HUB FLANGES2 ASTM A181-CLASS 60
Engineering Standards 14th Edition Effective Date: March 2012 For use in the Denver Water service area Materials Specification – 3 ... accordance with AWWA C207. Accessories for the mechanical joint shall consist of the gasket, gland, and fasteners
Plate Flange Standards ... ANSI / AWWA C207-07 ... American Water Works Association. Reprinted from ANSI / AWWA Standard C207-07 -- Steel Pipe Flanges for Waterworks Service and AWWA C228-08 Standard Stainless Steel Ring Flanges, by permission.
B. Flange to be AWWA C207 Class D ANSI, 150 lb. drilling. C. The carbon steel body shall have a 12 mil thick coating of fusion-bonded epoxy. Bolts shall be 18-8, ... International Plumbing Code Standards for backflow prevention devices.
Engineering Standards 14th Edition Effective Date: March 2012 For use in the Denver Water service area Materials Specification – 9 ... accordance with AWWA C207, Class D. Stainless steel flanges shall be fabricated from steel plate; dimensions shall be in accordance with AWWA C228, Class SD.
American National Standards Institute/American Water Works Association. ... Class E hub-type slip on flanges in accordance with ANSI/AWWA C207-86 except for insulated flanged joints.
AWWA C207 – Steel Pipe Flanges for Waterworks Service – Sizes 4-inch Through 144-inch. 9. AWWA C502 - Dry-Barrel Fire Hydrants. ... A. Perform Work in accordance with City of Cañon City standards. B. Maintain one copy of each document on site. C. Valves: ...
pipe shall be cement-lined in accordance with AWWA Standards C104, C110 or C153. Mechanical joint or push-on joint ends may be substituted for the bell ends. Flange ... AWWA Standard C207, Class D. Bolts shall be of high-strength low-alloy steel in accordance with
ANSI/AWWA C207 Class D or ANSI B16.5 150-lb class. Where the design pressure is greater than 150 psi, ... of the appropriate reference standards and standard practices. [FEBRUARY 1992] PIPING COMPONENTS [CONTRACT NO.]-[CONTRACT TITLE] 15000-5.
American Water Works Association (AWWA): a. ... 200 degrees F, conforming to ANSI B16.21, AWWA C207, and ASTM D1330, Grades 1 and 2 ... A. Factory Tests: In accordance with applicable AWWA standards. PART 3 EXECUTION 3.01 EXAMINATION A. Inspect pipe and fittings to ensure no cracked ...